Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Arvada?
Spring replacement in Arvada typically costs $180 – $340 for one torsion spring, and that’s the number we hear most homeowners asking about. A matched pair wears out together, so replacing both usually runs about twice that range. The written estimate you get on site sets the final price, and the estimate itself is free.
We’re Arvada Garage Door Service, and springs are one of the few things we do. That narrow focus matters here, because a broken spring is a very specific failure with a very specific fix, and guessing at it wastes everybody’s time. Our technicians have up to 8 years of experience and arrive already familiar with the door and opener systems common in Arvada homes.
A quick word on safety before anything else: torsion springs and their cables are under enough tension to cause serious injury if you try to handle them without the right tools and training. We don’t recommend touching them, and no honest guide should walk you through it. What follows is how spring pricing works in Arvada, not how to do the job.
Key Takeaways
- One torsion spring in Arvada: typically $180 – $340. A matched pair: about twice that.
- We replace both springs when they’re a matched set and the same age, because the second one is usually close behind.
- Door weight, spring type, and whether cables or bearings are worn all move the estimate up or down.
- Making an appointment for spring replacement is a normal call, not a crisis – the door, not the spring, sets how soon you want us there.
- Estimates are free. Call (866) 984-9695 to book one.
Spring Replacement Cost Breakdown (2026)
These are typical estimated ranges for the Arvada market in 2026. Your written estimate is the price, and it accounts for what’s actually on your door.
| Line Item | Typical Estimated Range |
|---|---|
| Spring repair / replacement (one spring) | $180 – $340 |
| Matched pair of springs | About twice the single-spring range |
| Cable repair (if cables are worn) | $130 – $250 |
| Roller replacement | $110 – $220 |
| Track realignment | $120 – $240 |
| Panel replacement (if a spring let go and struck a panel) | $250 – $500 |
| Opener repair (unrelated, but often asked about at the same visit) | $120 – $320 |
| Full garage door repair (broader repair work) | $150 – $600 |
What pushes a spring job toward the top of the range? Heavier doors, higher ceilings, and springs that have to be ordered to match a specific door’s weight and cycle rating all add cost. So does a door where the spring failure also bent a track or cracked a panel. The reverse is also true: a standard double-wide door with a clean single-spring break sits near the bottom. If your springs are fine but the opener is struggling, that’s a separate job and a separate estimate – our garage door opener repair work is priced independently.
What Affects Spring Replacement Pricing in Arvada
- Spring type. Almost every door here uses torsion springs mounted above the door, but some older doors and lighter aftermarket setups use extension springs along the tracks. Torsion work takes more care and specialized winding bars, and the quote reflects that.
- Door weight and size. A single-car door needs smaller springs than a double-wide insulated door. Heavier doors need heavier-gauge springs, and those cost more.
- Whether you replace one or both. Springs installed as a matched pair are the same age and wear out at roughly the same rate. When one goes, the other is usually on its way, so replacing both now costs less than paying for two separate visits.
- The condition of cables, drums, and bearings. A spring break can snap a cable or chew up a drum. If we’re already there, fixing those at the same time saves a second call and often a second charge for getting back out.
- Arvada’s seasonal swings. Cold snaps and hot stretches both stress springs, and doors sitting in a south-facing or west-facing garage bay in Arvada get more temperature cycling than one in a shaded spot. That’s a general observation about how springs fail here, not a rule that predicts your exact timing.
- Access and ceiling height. A tight garage with low clearance or a low headroom track setup takes longer, and time is part of the estimate.
How Does Spring Replacement Usually Go?
The job starts with a look at the door, the springs, the cables, and how the door balances. We identify the spring size and wire gauge needed, and if the truck doesn’t have it, we order it – that’s why we work across eight major brands, including LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor, so we aren’t stuck telling you “we don’t carry that part.” Once the correct springs are in hand, the old ones are unwound with proper winding bars, removed, and the new ones set and tensioned. Then the door gets tested through a full open and close cycle, with balance and travel checked before we call it done.
Most spring replacements are a single-visit job once the right part is on hand. Having the door and opener brand information available when you call helps us arrive ready rather than spend the first visit measuring. If you also want the opener looked at, we handle that in the same trip when it’s related – and if the opener is fine and the spring is the only issue, we say so. Repair or replace, honestly, is how we approach it.
Can Spring Replacement Be Done the Same Day?
Often, yes – if the spring size is one we can match at the time of the visit, we can typically replace it in one trip. If the door needs a specific spring we have to source, it may take an extra visit. Fast dispatch from 7am to 7pm Sunday through Friday helps here. When you call, tell us the door size, the approximate age of the springs, and anything you can see about the broken spring, and we can usually tell you before the visit whether it’s a same-day fix or a two-trip job.
To book, call (866) 984-9695. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday.
How to Save on Spring Replacement
- Replace the matched pair now. Paying for one spring twice, with two separate visits, costs more than replacing both at once. If your springs were installed together, the second one will follow the first.
- Pair related work with the spring visit. If your rollers are worn or a track is slightly out of line, having it fixed while the technician is already on site usually costs less than scheduling a second trip for it later.
- Get a written estimate before anyone starts. Ours are free, and the written estimate – not a phone guess – is the price you pay.
- Don’t wait for a second break. A door running on one broken spring is hard on the opener and hard on you. A broken spring is a chance to fix the whole system at one price.
- Know your opener. If your opener is already straining, mention it when you book the spring work. It might be a separate repair, or it might be an aligned fix, and it’s cheaper to know upfront.
If your door uses a LiftMaster or Chamberlain opener and you’re already planning a visit, our garage door opener repair work can often be quoted at the same time. If you’re thinking further ahead, the garage door replacement page covers what a full new door costs, which is worth reading if the door itself is showing age along with the springs.
When Is It Cheaper to Repair the Door Instead of Just the Spring?
Sometimes. If the door itself is sound and only the spring is broken, a spring replacement is clearly the cheaper path. If the door panels are dented, the tracks are bent, or the door is sagging at the corners, a spring fix alone may not solve the problem, and a broader repair range – typically $150 – $600 for general garage door repair – is worth discussing. If the door is at the end of its life, our garage door installation page explains full replacement, which typically runs $700 – $2,200.
Either way, the call is the same: ask for an honest look and a written estimate. Call (866) 984-9695. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What About Cables and Other Parts of the System?
Springs get the attention, but they’re one part of a balanced system. Cables run alongside the springs and carry the door’s weight, and they’re under the same tension. If a cable is frayed or loose, it gets addressed at the same time as the spring work – typically a $130 – $250 line item – because a spring that’s replaced while the cable is failing doesn’t help anyone. Rollers and tracks rarely cause the initial failure but are often found worn when the door is opened up for spring work. Those are the usual $110 – $220 and $120 – $240 ranges.
Panels sometimes take the hit when a spring lets go. If the door comes down hard and a panel bends, replacement panels typically run $250 – $500, and matching a panel to an older door depends on which brand and model you have. We work across Clopay, Amarr, Wayne Dalton, and Raynor doors, so we usually know what we’re looking at.
What Brand Information Should You Have Ready When You Call?
Whatever you can find. The door manufacturer and model, if it’s printed on the door’s label or stamped on the end of a panel, helps. So does the opener brand if you’re also having opener trouble – LiftMaster, Chamberlain, Genie, and Craftsman are the four we see most often on Arvada doors, and knowing which one you have keeps the estimate accurate. For spring work specifically, the door’s width, height, and whether it’s insulated or not matter more than the brand. Take a couple of photos of the door and the springs if you’re not sure. That’s genuinely enough for us to give you a straight answer on whether it’s a standard spring job or something less common.
Spring replacement is one of the most common jobs in Arvada, and pricing is usually predictable once we know what’s on your door. If you want a firm number before committing, the estimate visit is the place to get it, and it’s free. If you’re curious about what we handle for the Arvada area, our main page covers the full range of service.
FAQ – Spring Replacement Cost
How much does spring replacement cost in Arvada?
Spring replacement in Arvada typically costs $180 – $340 for one torsion spring, and about twice that for a matched pair. The exact price depends on the door, the spring type, and whether cables or other parts need attention. Call (866) 984-9695 for a free estimate – that number is a firm quote, not a guess.
Is it cheaper to replace one spring or both?
Replacing both costs more now but usually less overall – two separate one-spring visits typically total more than one paired visit. Springs installed together are the same age, so the second one is usually close behind the first. Call (866) 984-9695 to talk through which makes sense for your door.
How long does a spring replacement take?
Most spring replacements are a single-visit job, and the work itself is usually a couple of hours, with the exact time depending on door size, spring access, and whether cables or track work are added. The visit ends with a full balance and cycle test before we leave. Call (866) 984-9695 to book a time.
Can I replace a garage door spring myself?
No – torsion springs are under extreme tension, and a wrong move with the wrong tool can cause serious injury. This is one job where the professional cost is genuinely worth it. We handle it with proper winding bars and training, and we’re happy to look at your door. Call (866) 984-9695.
Do you work on all spring types and door brands?
Yes – we work on both torsion and extension spring setups, and we service and install doors from LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. If your brand isn’t on that list, ask – we may still be able to help. Call (866) 984-9695. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Arvada market as of 2026. Arvada Garage Door Service offers free estimates – call (866) 984-9695.
Written by the team at Arvada Garage Door Service.
What Our Customers Say
"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Gilbert Garcia"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Lisa Reed"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Yolanda Carter