Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in Arvada?
Panel replacement in Arvada typically costs $250 – $500 for a single section, and most jobs land inside that window once the panel is matched to your door. The low end covers a standard 21-inch section on a common door; the high end reflects a full-width bottom section or a panel that has to be special-ordered to match a discontinued profile. We give you a written estimate before any work starts, and that written estimate sets the final price.
Here’s what matters more than the number: a panel that matches your door, in the right color, on the right side of the door. Get any of those wrong and you’ve paid for a section that never looks like it belongs. Arvada Garage Door Service works on garage doors only, which means the person at your door already knows how Clopay, Amarr, Wayne Dalton, and Raynor section profiles differ, and won’t spend the first twenty minutes figuring it out.
Key Takeaways
- Typical panel replacement in Arvada runs $250 – $500 for one section.
- Matching an existing door’s profile and color is the single biggest cost driver.
- A dented bottom section is the most common reason homeowners call us.
- Panels on one door are replaced together when they’re a matched set, so ask for pricing per section and per set.
- Free estimates: call (866) 984-9695. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Panel Replacement Cost Breakdown (2026)
These are typical estimated ranges for the Arvada market in 2026. Your written estimate sets the final price, and it’s free.
| Line item | Typical estimated range |
|---|---|
| Single section panel replacement (standard door) | $250 – $500 |
| Bottom section replacement (most commonly hit) | $250 – $500 |
| Matched-pair section replacement (two sections) | About twice the single-section range |
| Panel replacement plus hardware/roller refresh | Separate line, quoted with the panel |
| Full garage door repair (if damage goes beyond a panel) | $150 – $600 |
| Opener repair (if the opener caused the contact damage) | $120 – $320 |
| Opener installation (new opener, if yours is at the end) | $250 – $550 |
| New door installation (when replacement beats repair) | $700 – $2200 |
What pushes a panel job toward the top of the range? A door with a discontinued panel profile, a special-order color, or a section that ships from the manufacturer rather than sitting on a shelf. What keeps it at the bottom? A current-production door in a common color where the section is available quickly. The panel itself is usually the smaller part of the cost; matching it correctly and getting it aligned on the track is where the work is.
One thing worth knowing about this particular repair: panel replacement is rarely the whole picture. When a car clips a bottom section, the impact often bends a hinge, shears a roller, or knocks a track out of plumb. Track realignment runs $120 – $240 and roller replacement runs $110 – $220, so if your estimate includes one of those lines, it’s not padding. It’s the honest scope. If you’d rather see the full repair picture first, our Arvada Garage Door Service team quotes the whole job in one visit.
What Affects Panel Replacement Pricing in Arvada
Panel pricing isn’t a fixed menu. These are the six factors that move the number most in the Arvada market.
- Whether the panel profile is still in production. Current door lines from Clopay, Amarr, Wayne Dalton, and Raynor are straightforward to match. A discontinued profile can mean a custom section, and that’s the single biggest lever on price.
- Color and finish matching. Standard white, almond, sandstone, and brown run at the low end. A custom color or a wood-grain finish adds cost, and older doors sometimes can’t be matched exactly, which we’ll tell you before you commit.
- Number of sections being replaced. One section sits in the $250 – $500 range. A matched pair is about twice that. If two adjacent sections are both damaged, replacing them together is usually the better value than doing one now and one next season.
- Panel height and width. Full-width bottom sections and taller sections cost more than a standard 21-inch section. Single-car doors use narrower panels than double-car doors, which changes the section count and the price.
- Hidden damage found once the panel is off. Bent hinges, worn rollers, a tweaked track, or a bent strut all surface when the section comes down. Those get quoted separately before we touch them.
- Front Range hail and wind. Along the Arvada foothills, hail and wind-driven debris do more panel damage than almost anything else, and the damage often shows up on the top sections, not the bottom. That matters because a top-section dent is harder to see from the driveway but no cheaper to fix.
If the damage traces back to the door hitting something on the way down, the opener may be part of the problem. A force setting that’s too high, a failing travel limit, or a misaligned safety sensor can send a door down hard enough to damage its own sections. That’s when a panel quote turns into a conversation about Arvada opener repairs as well, and we’d rather have that conversation before the new panel goes on than after it gets hit too.
How to Save on Panel Replacement
There’s no trick to paying less for a good panel job, but there are real ways to avoid paying more.
- Replace the section, not the door, when the door is otherwise sound. If the tracks are straight, the springs are healthy, and only one section is dented, a panel is the right call. Full door installation in Arvada runs $700 – $2200, and there’s no reason to spend that on a cosmetic dent.
- Ask for the model number off the door before you call. The sticker on the inside of the top section or the jamb tells us the manufacturer and the model. That one detail can cut a special-order lead time down to a stock part, and stock parts cost less.
- Fix two damaged sections at once. If two sections took the same hit, doing them together saves a second visit and a second setup.
- Treat the cause, not just the dent. If your opener’s force setting or travel limits caused the damage, adjusting them during the same visit is a few minutes of work. Skipping it means the new panel takes the same hit.
- Get the estimate in writing before anything is ordered. A written estimate, with the panel identified by profile and color, is the difference between a fair price and a surprise.
Free estimates are how we start every job. Call (866) 984-9695 and we’ll get you a written number. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. If you’re weighing a panel against a full door, our garage door repair in Arvada overview lays out when each one makes sense.
Can You Replace Just One Panel, or Does the Whole Door Have to Go?
One panel, in most cases. A sectional garage door is built from individual sections, and each one can be replaced on its own as long as the manufacturer still makes that profile and the rest of the door is structurally sound. The exceptions are doors with a discontinued profile, doors where the damage has compromised the track or the springs, and doors where the section can’t be color-matched to the existing panels. In those cases we’ll tell you plainly, because we handle repair and installation both and have no reason to steer you toward the bigger job.
Our technicians have up to 8 years of experience, and they’ve seen what happens when a panel is forced onto a door it doesn’t quite fit. Getting the profile and the hinge spacing right is the whole job. Call (866) 984-9695 for a free estimate on your specific door.
Do I Need a Permit to Replace a Garage Door Panel in Arvada?
A single panel swap on an existing door generally doesn’t require a permit, but permit rules vary and a full door replacement often does. Call the City of Arvada building department to confirm what applies to your job before work begins. We’d rather you ask the city than take our word for it on a code question, and we’ll work to whatever the city requires.
If your project is edging toward a full replacement, our garage door installation in Arvada page covers what that involves. Call (866) 984-9695 and we’ll quote both paths so you can compare.
FAQs – Panel Replacement Cost
How much does it cost to replace a garage door panel in Arvada?
Panel replacement in Arvada typically costs $250 – $500 for a single section, with the written estimate setting the final price. The range reflects whether the panel is a stock item or a special order, and whether the job needs a matching pair. Call (866) 984-9695 for an exact quote – estimates are free.
Is it cheaper to repair or replace a garage door panel?
Repair is almost always cheaper when only one section is damaged. A panel at $250 – $500 is a fraction of full door installation at $700 – $2200. Replacement starts making sense when several sections are damaged, the profile is discontinued, or the tracks and springs are already worn. Call (866) 984-9695 and we’ll tell you honestly which way your door points.
Can you come today?
Often, yes. Same-day service is available, and we answer the phone 24/7 with fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (866) 984-9695.
Why does panel replacement cost more on some doors than others?
The main reason is whether the panel profile is still in production. Doors from Clopay, Amarr, Wayne Dalton, and Raynor with current profiles are straightforward and sit at the low end of $250 – $500. A discontinued profile or a custom color pushes toward the high end. Call (866) 984-9695 with your door’s model number and we’ll tell you where yours falls.
Does my opener matter when I’m replacing a panel?
Sometimes, yes. If a force setting or travel limit caused the door to close hard enough to damage its own section, the new panel will take the same hit until the opener is adjusted. Opener repair runs $120 – $320 and opener installation runs $250 – $550 if yours is near the end of its life. We work on LiftMaster, Chamberlain, Genie, and Craftsman systems alongside the door, so the whole job gets checked in one visit. Call (866) 984-9695 for a free estimate.
Whether it’s one dinged bottom section or a full set that took a hail hit, we’ll quote it in writing, identify the panel by profile and color, and tell you if repair isn’t worth it. Call (866) 984-9695 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Arvada market as of 2026. Arvada Garage Door Service offers free estimates – call (866) 984-9695.
What Our Customers Say
"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Lisa Reed"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Gilbert Garcia"Good repair, reasonable money. The door still has a slight shudder about a foot from the top that he said is the track being slightly out of true on an old frame and would cost real money to fix properly. Fair enough, but I'd hoped it would be perfect."
- Gabriela Mendoza